CCI (Camera Control Interface) Cable

The CCI cable allows only Sony and Panasonic cameras to control zoom/shutter from the handle of the RAGE or RAGE-S*. You will need to download our EVO Remote APP in order to get this cable set up. Here is how to get the cable working:

On the CCI cable you will see on one end of the cable, it says gimbal. You will want that side plugged into the gimbal (near the tilt motor NOT the handle) and the other side plugged into the camera. Be sure both units are turned on. Go into our smartphone app called EVO Gimbals Remote and connect via bluetooth. Once you are connected, please click on the gimbal icon (highlighted yellow in the images below). Select the "Camera Manufacture" tab and select the brand of camera you are using. You may need to scroll down a bit if you are in portrait mode.  Power cycle your gimbal and camera by turning off both the camera and the gimbal and wait a couple of seconds. Then, power on the gimbal first and then the camera. 

     

For those of you that are visual learners, here is a tutorial video:

*Note: Non-motorized lenses do not support optical zoom