Getting Started

1. CHARGE THE BATTERIES Charge both 18350 batteries with the provided EVO Battery Charger and the USB cable. This will take 2 to 3 hours.

2. INSTALL THE BATTERIES Carefully install both charged batteries noting the correct direction, then slide the battery cover plate in place and tighten the battery cover thumbscrew.

3. MOUNT ACTION CAMERA 

a. Unscrew the two thumb screws on the back of the action camera mount.

b. Slide the action camera all the way until it touches the Tilt Motor. Tighten the the two thumb screws. 

Warning ALWAYS MOUNT YOUR ACTION CAMERA BEFORE YOU POWER IT ON! FAILURE TO DO SO CAN DAMAGE THE UNIT!

4. POWER ON With the gimbal on a flat non-moving surface press and hold the Power Button for 4-5 seconds for the gimbal to initialize. Once powered on, The EVO GP-PRO starts up in Pan Follow Mode. See page 7 of your manual for details on the other modes.